Kobold 200 Par Production Kit DW

Rental price: $85.00 per 1 day(s)

Day
Price: $85.00

Weekly
Price: $255.00

Monthly
Price: $765.00

Replacement Value: $2,500.00

Qty:

SKU: SK9694230

Data Sheet

Kobold DW 200 Par Production Kit

The Kobold DW 200 AC PAR 200 Watt HMI Production Kit is built around the IP54 rated, weather-proof DW 200 lamp base which withstands water splashing on it from any direction without harmful effect. The optimized design of the reflector achieves a high light output and a homogeneous illumination. The ergonomically positioned focusing knob enables focusing of 14-51ø.

This daylight fixture has a solid design, compact dimensions and maximum reliability for all applications in the studio and on location. When the Kobold EWB-200 AC Ballast is connected to a 90-265VAC source, this weather-resistant ballast will provide dimmable power to your fixture via its included head-to-ballast cable. Completing this kit are a glass diffusion filter, a glass (CTO) conversion filter, four leaf barn door set, stand mount, 200 Watt HMI Hot Restrike Bulb, and a Production Kit Case. A lens bag is included to protect the filters.

DW200 Fixture features:
Focus: Use the rotary knob on the rear of the fixture to adjust focus; note the corresponding "flood" and "spot" symbols on the fixture label indicating the adjustment directions.
Installation is quick and without any tools, due to a locking mechanism. The optimized design of this reflector achieves a high light output and a homogeneous illumination.
Light output: Spot: 8100 lux / 753 fc Flood: 1675 lux / 156 fc
Barn Door Set: To place the barn door on the fixture, slip it onto the impressed section of the ring and secure it with the knurled screw located opposite the recess. Pull the knurled screw and let it spring back into place; then tighten it to secure the barn door.
Hot Restrike: Socket and switches are equipped to allow switching the fixture on and off repeatedly without the delay of waiting for the bulb to cool.
Ballasts features:
The required light output can be set (100 - 60% adjustment range) with the power regulator.
Color temperature can change with the power output depending on the type of lamp used.
To connect the ballast unit to the fixture just plug in the corresponding connection.
To disconnect, press the security mechanism on the socket before pulling out the plug.
Red and Green LEDs continuously monitor operation, indicate voltage changes and employ thermo protection, power reduction and even shut-down if necessary.
Water-resistant IP rated components: IP 54 (Lamphead), IP 43 (EWB 200), IP 20 (BB 200), with strengthened insulation for additional protection.
Ignition overload protection
Temperature monitor
Convection cooling
Meets CE Standards
Glass Diffusion Filter: softens and diminishes light output.
Glass CTO Conversion Filter: Converts 5600K output of the HMI lamp to match 3200K tungsten sources.
Four leaf barn door set helps shape the light
Full and double scrim help control the intensity

PAR Head

Head cable

(4) Par Lenses

Ac power cable

Barndoors

(3) Scrims

HD case

You have no items in your shopping cart.