Panasonic 21" LCD Monitor BT-LH2170P - HDMI SDI
This LCD-HD 21” monitor offers full HD 1920x1080 Resolution- 10-Bit Image Processing Engine- 3D Look Up Table Color Correction- 3G-SDI, HDMI, Video, DVI Connectivity- 3D Assist Functions- Focus-In-Red Function- In-Monitor Display for Text and Tally- Waveform and Vectorscope Display
• Reliability and durability are ensured by a rugged aluminum diecast body.• Runs on AC/DC power.• SDI (SDI1 (3G)/SDI2) inputs, HDMI input, DVI-I input.• RS-485 (RJ-45), RS-232C (9-pin) and GPI (9-pin) remote inputs.• Tally lamp (red/green/amber).• Speakers and headphone jack on the front panel.• Stand included as standard equipment (detachable).• Low power consumption and mercury-free LED backlight help protect the environment.
The 55 cm (21.5 inches) IPS (In-Plane Switching) LCD panel has Full-HD (1920 x 1080) resolution. It combines high intensity, high contrast and a wide 178° viewing angle in both horizontal and vertical directions. Easy viewing is ensured by reducing color changes due to the viewing angle.
3D-LUT and 6-Axis Color Correction: Eliminates color phase shifts(drift) in the LCD panel caused by changes in luminance. By providing a look-up table for each luminance level and applying 10-bit image processing to each RGB color, it balances the six coordinate poles of the three primary colors (RGB) and their complementary colors (CMY). This helps to reproduce the intermediate shades of extremely fine colors.
Short Latency: A high-performance I/P converter circuit minimizes the delay between the input signal and monitor output to less than a fieldin length.Diagonal Line Compensation: Reproduces smooth images by suppressing noise in the diagonal direction.Gradation: Individual RGB corrections are made on every monitor that is shipped, to reproduce rated gamma properties (γ= 2.2) and ensuregradation suitable for broadcasting.Color Temperature: 9300 K/6500 K/5600 K selectable, or 3000 K to 9300 K variable.
Focus-in-Red: Emphasizes sharply focused image areas.R/G/B Color: Turns the display on/off of each individual R/G/B color.Waveform Monitor (WFM): Displays the waveform of Y, R, G or B signals in a sub-screen.Vectorscope Display: Allows the color gamut to be checked in a sub-screen.Audio Level Meter: Up to 8 channels can be simultaneously displayed. A peak hold function is included. For 3G-SDI input, 1-8 channels or 9-16 channels can be selected.HV Delay: Displays the video blanking period.Mono Mode: Switches the display to black-and-white.Pixel-to-Pixel Display: Displays the actual pixels without resizing.
Still/Motion Image Display: An image from any desired part of moving picture from the same source can be displayed as a still image in a sub-screen. Useful for matching the images.2 Motion Image Display: Allows use as a video monitor for two SDI inputs. Status and audio level meters can also be displayed for eachof the two inputs.Picture Assist (Image Adjustment): Image adjustment on the monitor and the results of assist functions from the same source can be displayed side-by-side with the original images for comparison.